Lift table - Lifting plate-form

The non accompanied industrial hoists or for particular use elevators, made-to-measure manufactured according to the various planting criteria, allow the vertical transfer between several superimposed levels of any type of loads, but without embarked staff. This application has a growing success because of the research of the surfaces optimization of production or storage.

Beyond 2,000 m stroke, these installations must be in conformity with the "French standard P 82-260" published in May 1991.

To respect the current legislation, a complete installation must imperatively include :

• An elevator (electrohydraulic with columns or a scissors lifting table with guiding wheels and anti-drift locks) completely integrated/protected in a built sheath or a metal cage with landing doors, also with electromechanical locks and external control boxes.

We can realize to measure, either the elevator alone or with some external annex equipmenst, or the complete installation as well complementary services as transport, assembly, startup, then maintenance.

• The standard range of electrohydraulic elevators with columns, more particularly suitable to be integrated in reduced spaces, with or without possibility of pit, is planned for loads up to 2500 kg, with made-to-measure platforms up to 2 m² and up to 14 m stroke.
  
  
• The range of electrohydraulic lifting tables with scissors is more often limited by the vertical stroke and by the pits depth; on the other hand, it is practically unlimited in capacity and dimensions.

Loads transfer between a parking and an outdoor basement. Elevator with columns in self-supporting hot dip galvanized metal cage, closed landing door with electromechanical lock, button box and access ramp.	Interior view of the cage with open door lifting platform in low position.

View of hot galvanized protections located in prolongation of the metal cage at vehicles parking/unloading area, access door with electromechanical lock (lifting platform located at the lower level).	View of hot galvanized protections at parking level and detail of the access door with 2 leaves, electromechanical lock and button box (lifting platform located at the lower level).

Detail of hot galvanized protections at parking level with the lifting platform.	Elevator with columns in self-supporting hot dip galvanized metal cage, closed landing door with electromechanical lock and access ramp, installed between a ground floor and a metal floor.

Prolongation of the metal cage at the higher level with access door with electromechanical lock (lifting platform located at the lower level).	Detail of the access door with electromechanical lock and lifting platform at higher level.

Read more