Lift table - Lifting plate-form

CEFAM S.A. fabrications ATLAS
Home Cefam-Atlas Security After Sale Dept Specific tables Products Sales network Contact

Lift table - Model AVL
Conceived for capacities of 500, 1000, 1500 or 2000 daN, with its possibilities of dimensional modifications and the many adaptable specific equipment, this range is used for multiple applications.

Building
  • Formed and welded heavy sheet steel sections covered either with a plain or a chequered steel plate.
  • Scissors device in heavy section flat steel plate profile cut.
  • Single acting cylinder with chrome steel rod and an end of stroke mechanical stop.
  • Articulations, bearings and rollers without maintenance, forecasted to execute a maximum of 20 cycles per hour, 8 hours a day, 5 days a week.
  • Hydro electrical power unit placed inside or outside the lifting table.
  • Electric control chest placed outside, feeding voltage 3phased 230 or 400 Volts 50 Hz, connected to the lifting table with 3 meters cable.
  • An “up-down” and “emergency stop” 24 Volts hand push-button control box connected to the electric control chest with 3 meters cable.
  • Adjustable travel limit switches on all units .... mechanical type plastic box IP 65.
  • Electrical cables model FR-N05-VV5-F.
  • Colour : BLUE RAL 5014.

Security
  • Double hydraulic safety valve incorporated in the cylinder and a pilot-operated electrically lock valve in foot of this cylinder for maintenance and locking up of the platform in position in the event of electric voltage failure or hose breaking.
  • Mechanical end of stroke stop in each cylinder.
  • Pressure limit valve set in the factory, to prohibit a load higher than 1,1 time the lifting table rated capacity.
  • End of stroke up electrical switch ; it ensures the automatic stop of the platform rausing at it maximum stroke.
  • Safety frame under the platform perimeter to stop the lowering in case of obstacles.
  • Hand push button control up-down and emergency stop : 24 Volts.
  • Safety legs keep the lifting table at a settled level for maintenance.
  • Before forwarding, each lifting table is checked and undergoes the regulation tests .
  • Conceiving and building of these lifting tables comply with the rules of manufacture and safety requirements imposed by the European Standards and regulations no. 98/37.
  • The EC of Conformity is set on all these delivered models.

Main options
  • Fix, removable or portable standardize safety handrails.
  • Bridging plate with manual or hydraulic raising to facilitate the transfer of the loads in vehicles.
  • Retractable plinth and stop (drop proof security for the lifting trucks).
  • Reinforced platform for overloads rolling in low position.
  • For side protection of the scissors and to forbid access under the lifting plate: safety removable safety skirts with bellows or steel net, curtains fabric or metal on spring winder.
  • Manually or motorized swivelling, tilting, telescopic or sliding platform.
  • Special articulations for uninterrupted working at high rates.
  • Up – Down controls by pedal.
  • Unlike feeding and control voltage.
  • Mobile version on ground or rails with free or motorized displacement.
  • Special treatment for aggressive surroundings (sanding and suitable painting, , plating, hot dip galvanization).
  • Free or motorized rollers.
  • Constant levelling device by photo-electric cell for loading and unloading of materials in plates (paperboard, wood, plaster, etc..).
  • Specific electric components : explosion-proof, tropicalized, programmable automaton, etc...
  • Special models of lifting tables on request.

Model AVL
Ref. Load
(daN)		 Length
(mm)		 Width
(mm)		 L.P.
(mm)		 H.P.
(mm)		 Stroke
(mm)		 Time
(sec.)		 Power
(kw)		 Weight
(kg)
AVL05-1208 500 1200 800 182 982 800 20 1.10 225
AVL05-1210 500 1200 1000 182 982 800 20 1.10 235
AVL05-1212 500 1200 1200 182 982 800 20 1.10 240
AVL05-1608 500 1600 800 280 1280 1000 15 1.10 350
AVL05-1610 500 1600 1000 280 1280 1000 15 1.10 385
AVL05-1612 500 1600 1200 280 1280 1000 15 1.10 410
AVL05-2010 500 2000 1000 330 1630 1300 20 1.10 470
AVL05-2012 500 2000 1200 330 1630 1300 20 1.10 495
AVL05-2016 500 2000 1600 330 1630 1300 20 1.10 550
AVL10-1208 1000 1200 800 182 982 800 30 1.10 250
AVL10-1210 1000 1200 1000 182 982 800 30 1.10 260
AVL10-1212 1000 1200 1200 182 982 800 30 1.10 265
AVL10-1608 1000 1600 800 280 1280 1000 25 1.10 410
AVL10-1610 1000 1600 1000 280 1280 1000 25 1.10 440
AVL10-1612 1000 1600 1200 280 1280 1000 25 1.10 465
AVL10-2010 1000 2000 1000 330 1630 1300 25 1.50 535
AVL10-2012 1000 2000 1200 330 1630 1300 25 1.50 575
AVL10-2016 1000 2000 1600 330 1630 1300 25 1.50 650
AVL10-2514 1000 2500 1400 360 2010 1650 30 1.50 800
AVL10-2516 1000 2500 1600 360 2010 1650 30 1.50 865
AVL10-2520 1000 2500 2000 360 2010 1650 30 1.50 960
AVL10-3016 1000 3000 1600 400 2300 1900 40 1.50 1045
AVL10-3020 1000 3000 2000 400 2300 1900 40 1.50 1165
AVL20-1208 2000 1200 800 270 990 720 22 1.10 490
AVL20-1210 2000 1200 1000 270 990 720 22 1.10 550
AVL20-1212 2000 1200 1200 270 990 720 22 1.10 600
AVL20-1610 2000 1600 1000 300 1300 1000 28 1.50 650
AVL20-1612 2000 1600 1200 300 1300 1000 28 1.50 700
AVL20-1616 2000 1600 1600 300 1300 1000 28 1.50 800
AVL20-2010 2000 2000 1000 350 1650 1300 39 1.50 800
AVL20-2012 2000 2000 1200 350 1650 1300 39 1.50 850
AVL20-2016 2000 2000 1600 350 1650 1300 39 1.50 1000
AVL20-2514 2000 2500 1400 360 2010 1650 28 3.00 1030
AVL20-2516 2000 2500 1600 360 2010 1650 28 3.00 1190
AVL20-2520 2000 2500 2000 360 2010 1650 28 3.00 1300
AVL20-3016 2000 3000 1600 400 2300 1900 37 3.00 1450
AVL20-3020 2000 3000 2000 400 2300 1900 37 3.00 1600

Caption
Légende : Load : Maxi lifting capacity in daN Width. : Platform width in mm L.P. : Collapsed height in mm H.P. : High position en mm Power. : Power in Kw Time : Lifting time for a total stroke (H.P. - L.P.) in sec. Weight. : Dead weight in kg
Back
Pdf brochures
Comercial contact
Low position
Double hydraulic safety
End of stroke mechanic stop
End of stroke electric switch
Up / Down and emergency stop controls box
Retractable safety stops
Visite Cefam Fabrications Atlas websites
Plate-formes elevatrices - Monte-charge - Table elevatrice - Mesa elevadora - Lift tables
Cefam Atlas - Fabricant de tables élévatrives - Cefam Atlas - lift table manufacturer - Cefam Atlas - Fabricante de mesa elevadora