Lift table - Lifting plate-form

CEFAM S.A. fabrications ATLAS
Home Cefam-Atlas Security After Sale Dept Specific tables Products Sales network Contact

Lift table - Model SL
Conceived for loads of 500, 1000 or 1500 daN, this range, which some models can be equipped with safety bellows, was especially studied for installation of working stations, (stocking, checking, orders preparation, conditioning, packaging, etc…).

Building
  • Plain steel plate on all the models.
  • Scissors device in heavy section flat steel plate on all models.
  • Single acting cylinder with chrome steel rod.
  • Articulations, bearings and rollers without maintenance, forecasted to execute a maximum of 10 cycles per hour, 8 hours a day, 5 days a week.
  • Hydro electrical power unit placed inside or outside the lifting table.
  • Electric control chest placed outside, feeding voltage 3phased 230 or 400 Volts 50 Hz, connected to the lifting table with 3 meters cable.
  • An "up-down" and "emergency stop" 24 Volts hand push-button control box connected to the electric control chest with 3 meters cable.
  • Safety travel limit switches .... mechanical type plastic box IP 65.
  • Electrical cables model FR-N05-VV5-F.
  • Colour : BLUE RAL 5014.

Security
  • Double hydraulic safety valve incorporated in the cylinders and a pilot-operated electrically lock valve at this cylinder base for maintenance and locking up of the platform in position in the event of electric voltage failure or hose breaking.
  • Pressure limit valve set in the factory, to prohibit a load higher than 1,1 time the lifting table rated capacity.
  • Electrical end of stroke switch on high position ; it ensures the automatic stop of the lifting platform at its maximum stroke.
  • Safety frame under the platform perimeter to stop the lowering in case of obstacles.
  • Hand push button control up-down and emergency stop : 24 Volts.
  • Safety legs keep the lifting table at a settled level for maintenance.
  • Before forwarding, each lifting table is checked and undergoes the regulation tests.
  • Conceiving and building of these lifting tables comply with the rules of manufacture and safety requirements imposed by the European Standards and regulations no. 98/37.
  • The EC of Conformity is set on all these delivered models.

Main options
  • For the up and down motions, a pedal can replace the electrical push buttons box. The "emergency stop" button is then located on the electrical control chest door.
  • Safety bellows on the following models :
    SL 05-1410, SL 05-1412, SL 05-1610, SL 05-1612, SL 10-1410, SL 10-1412, SL 10-1610, SL 10-1612, SL 15-1410, SL 15-1412, SL 15-1610, SL 15-1612

Atlas extras
en

Model SL
Ref. Load
(daN)		 Length
(mm)		 Width
(mm)		 L.P.
(mm)		 H.P.
(mm)		 Stroke
(mm)		 Time
(sec.)		 Power
(kw)		 Weight
(kg)
SL05-1208 500 1200 800 180 980 800 28 0.55 160
SL05-1210 500 1200 1000 180 980 800 28 0.55 165
SL05-1410 500 1400 1000 180 980 800 28 0.55 190
SL05-1412 500 1400 1200 180 980 800 28 0.55 195
SL05-1508 500 1500 800 220 1220 1000 40 0.55 170
SL05-1510 500 1500 1000 220 1220 1000 40 0.55 175
SL05-1610 500 1650 1000 220 1220 1000 40 0.55 200
SL05-1612 500 1650 1200 220 1220 1000 40 0.55 190
SL10-1208 1000 1200 800 180 980 800 28 1.10 195
SL10-1210 1000 1200 1000 180 980 800 28 1.10 200
SL10-1410 1000 1400 1000 180 980 800 28 1.10 220
SL10-1412 1000 1400 1200 180 980 800 28 1.10 230
SL10-1508 1000 1500 800 220 1220 1000 40 1.10 205
SL10-1510 1000 1500 1000 220 1220 1000 40 1.10 210
SL10-1610 1000 1650 1000 220 1220 1000 40 1.10 235
SL10-1612 1000 1650 1200 220 1220 1000 40 1.10 240
SL15-1210 1500 1200 1000 200 1000 800 28 1.10 235
SL15-1410 1500 1400 1000 200 1000 800 28 1.10 255
SL15-1412 1500 1400 1200 200 1000 800 28 1.10 265
SL15-1510 1500 1500 1000 250 1250 1000 40 1.10 245
SL15-1610 1500 1650 1000 250 1250 1000 40 1.10 270
SL15-1612 1500 1650 1200 250 1250 1000 40 1.10 275

Caption
Légende : Load : Maxi lifting capacity in daN Width. : Platform width in mm L.P. : Collapsed height in mm H.P. : High position en mm Power. : Power in Kw Time : Lifting time for a total stroke (H.P. - L.P.) in sec. Weight. : Dead weight in kg
Back
Pdf brochures
Comercial contact
Sl with bellows on high position
Safety frame
Detail on the filling plug of the hydraulic unit
Cylinder rod articulation of a model SL
Filling of the hydraulic power unit
Safety stop
Visite Cefam Fabrications Atlas websites
Plate-formes elevatrices - Monte-charge - Table elevatrice - Mesa elevadora - Lift tables
Cefam Atlas - Fabricant de tables élévatrives - Cefam Atlas - lift table manufacturer - Cefam Atlas - Fabricante de mesa elevadora