Lift table - Model SL2 |
 Conceived for loads of 500, 1000, 1500 or 2000 daN, this range has been especially studied for installation of working stations. |
| Building |
- Plain or a chequered steel plate on all the models.
- Scissors device in heavy section flat steel plate profile cut.
- Single acting cylinder with chrome steel rod and an end of stroke mechanical stop.
- Articulations, bearings and rollers without maintenance, forecasted to execute a maximum of 20 cycles per hour, 8 hours a day, 5 days a week.
- Hydro electrical power unit placed inside or outside the lifting table.
- Electric control chest placed outside, feeding voltage 3phased 230 or 400 Volts 50 Hz, connected to the lifting table with 3 meters cable.
- An "up-down" and "emergency stop" 24 Volts hand push-button control box connected to the electric control chest with 3 meters cable.
- Adjustable safety travel limit switches .... mechanical type plastic box IP 65.
- Electrical cables model FR-N05-VV5-F.
- Colour : BLUE RAL 5014.
|
| Security |
- Double hydraulic safety valve incorporated in the cylinder and a pilot-operated electrically lock valve at this cylinder base for maintenance and locking up of the platform in position in the event of electric voltage failure or hose breaking.
- Mechanical end of stroke stop in each cylinder.
- Pressure limit valve set in the factory, to prohibit a load higher than 1,1 time the lifting table rated capacity.
- Electrical end of stroke switch on high position ; it ensures the automatic stop of the lifting platform at its maximum stroke.
- Safety frame under the platform perimeter to stop the lowering in case of obstacles.
- Hand push button control up-down and emergency stop : 24 Volts.
- Safety legs keep the lifting table at a settled level for maintenance.
- Before forwarding, each lifting table is checked and undergoes the regulation tests .
- Conceiving and building of these lifting tables comply with the rules of manufacture and safety requirements imposed by the European Standards and regulations no. 98/37.
- The EC of Conformity is set on all these delivered models.
|
| Main options |
- Fix, removable or portable standardize safety handrails.
- Bridging plate with manual or hydraulic raising to facilitate the transfer of the loads in vehicles.
- Retractable plinth and stop (drop proof security for the lifting trucks).
- For side protection of the scissors and to forbid access under the lifting plate: safety removable safety skirts with bellows or steel net, curtains fabric or metal on spring winder.
- Manually or motorized swivelling, tilting, telescopic or sliding platform.
- Special articulations for uninterrupted working at high rates.
- Up – Down controls by pedal.
- Unlike feeding and control voltage.
- Mobile version on ground or rails with free or motorized displacement.
- Special treatment for aggressive surroundings (sanding and suitable painting, , plating, hot dip galvanization).
- Free or motorized rollers.
- Constant levelling device by photo-electric cell for loading and unloading of materials in plates (paperboard, wood, plaster, etc..).
- Specific electric components : explosion-proof, tropicalized, programmable automaton, etc...
- Special models of lifting tables and equipment, on request.
|
| Ref. |
Load
(daN) |
Length
(mm) |
Width
(mm) |
L.P.
(mm) |
H.P.
(mm) |
Stroke
(mm) |
Time
(sec.) |
Power
(kw) |
Weight
(kg) |
| SL205-1010 |
500 |
1000 |
1000 |
400 |
1450 |
1050 |
15 |
1.10 |
530 |
| SL205-1210 |
500 |
1200 |
1000 |
400 |
1800 |
1400 |
20 |
1.10 |
600 |
| SL205-1512 |
500 |
1500 |
1200 |
400 |
2150 |
1750 |
35 |
1.50 |
650 |
| SL205-2010 |
500 |
2000 |
1000 |
400 |
2900 |
2500 |
35 |
3.00 |
700 |
| SL210-1010 |
1000 |
1000 |
1000 |
400 |
1450 |
1050 |
25 |
1.10 |
550 |
| SL210-1210 |
1000 |
1200 |
1000 |
400 |
1800 |
1400 |
35 |
1.10 |
630 |
| SL210-1512 |
1000 |
1500 |
1200 |
400 |
2150 |
1750 |
45 |
1.50 |
670 |
| SL215-1010 |
1500 |
1000 |
1000 |
400 |
1450 |
1050 |
30 |
1.50 |
570 |
| SL215-1210 |
1500 |
1200 |
1000 |
400 |
1700 |
1300 |
35 |
1.50 |
600 |
| SL215-1512 |
1500 |
1500 |
1200 |
400 |
2150 |
1750 |
35 |
3.00 |
700 |
| SL220-1010 |
2000 |
1000 |
1000 |
400 |
1450 |
1050 |
30 |
1.50 |
590 |
| SL220-1210 |
2000 |
1200 |
1000 |
400 |
1700 |
1300 |
35 |
1.50 |
630 |
| SL220-1512 |
2000 |
1500 |
1200 |
400 |
2150 |
1750 |
35 |
3.00 |
700 |
Caption
Légende :
Load : Maxi lifting capacity in daN
Width. : Platform width in mm
L.P. : Collapsed height in mm
H.P. : High position en mm
Power. : Power in Kw
Time : Lifting time for a total stroke (H.P. - L.P.) in sec.
Weight. : Dead weight in kg |
|
|
Back
